Scart Connection; Controlling Devices With Scart Using Av Link - Sharp Aquos LC-32LE700E Operation Manual

Connecting external devices

SCART connection

Example of connectable devices
E
Decoder
Decoder

SCART cable
NOTE
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder
is connected in "Manual adjust" in the "Analogue setting" menu (Page 29).
• TV-VCR advanced AV Link systems may not be compatible with some external sources.
• You cannot connect the VCR with decoder using a fully wired SCART cable when selecting "Y/C" under "EXT 2" in the "Input select"
menu.

Controlling devices with SCART using AV Link

This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual
equipment.
One touch play
TV standby
WYSIWYR
Preset download
NOTE
• Refer to the operation manuals of external equipment for details.
• The AV Link function works only when audiovisual equipment is connected to the EXT 2 terminal with a fully wired SCART cable.
• The use of the AV Link function is only possible if the TV has enforced a complete auto installation with the connected audiovisual
equipment (refer to Initial auto installation on page 9).
The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type of
equipment used, it is possible that the described functions may be completely or partially unusable.
• When the TV receives a scrambled DTV signal, the WYSIWYR function may not work.
• If the TV's received signal is switched to a scrambled signal during recording with the WYSIWYR function, black images will be recorded
in the external device.
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual
source (e.g., VCR, DVD player/recorder).
When the TV enters standby mode, the connected audiovisual equipment (e.g., VCR, DVD player/
recorder) enters standby mode as well.
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically
start recording by pressing the WYSIWYR button.
Automatically transfers the channel preset information from the tuner on the TV to the one on the
connected audiovisual equipment (e.g., VCR) via the EXT 2 terminal.
Example of connectable devices
E
VCR
E
DVD player/recorder
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using a fully wired
SCART cable.
VCR

SCART cable
Decoder
17