Password/Parental Lock Settings; Other Basic Adjustments - Sharp Aquos LC-32LE700E Operation Manual

Basic adjustment

Password/Parental lock settings

Setup
Child lock
Allows you to use a PIN to protect certain settings from
being accidentally changed.
NOTE
• PIN input is required when executing "Child lock". The default
PIN is "1234". To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 41).
Change PIN
Register a four-digit password number to use the "Child
lock" function.
1
Enter the four-digit number as a PIN using
0_9 numeric buttons.
2
Enter the same four-digit number as in step 1
to confirm.
• "The system PIN has been changed successfully"
displays.
NOTE
• To view a locked channel, you must enter the PIN (see pages
28 and 29 for locking channels from viewing in DTV and ATV
mode). When you select a locked channel, a PIN prompt
message pops up. Press 6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
• As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
Parental rating
This function allows DTV services to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
NOTE
• "Universal viewing" and "Parental approval pref." are ratings
used exclusively in France.
• Refer to page 47 for details about ratings.
30

Other basic adjustments

Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Off Unlocks the buttons.
Locks all buttons on the remote control
RC control lock
unit.
Locks the buttons on the TV except the
Button control lock
power switch.
NOTE
You cannot set both "RC control lock" and "Button
control lock" at the same time.
E
Cancelling the lock
Press @ on the TV and set to "Off" to cancel the
"RC control lock". Press @ on the remote control
unit and set to "Off" to cancel the "Button control lock".
Refer to page 22 for menu operation using @ on the TV.
•
Setup
Quick start
You can reduce the TV's start-up time after turning on the
power with the remote control unit.
The TV quickly starts up from standby.
On 30 W or more of power consumption is
required during standby.
Power consumption is small during
Off
standby.
Setup
Blue illumination
The LED on the front of the TV is blue when illuminated.
NOTE
• The factory default for this item is "On". Set to "Off" if you do
not want the LED to illuminate.
Item
Item