Aquos Link Setup - Sharp Aquos LC-32LE700E Operation Manual

AQUOS LINK
Connecting an AQUOS BD player/AQUOS recorder via
the AQUOS AUDIO speaker system
AQUOS BD player/AQUOS
recorder

HDMI-certified cable

AQUOS LINK setup

Basic operation
Go to "MENU" > "Option" > "AQUOS LINK
setup" > select the menu you want to set.
AQUOS LINK control
Set to "On" to enable HDMI CEC functions.
Auto power on
If this is activated, the one touch play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
NOTE
• The factory default for this item is "Off".
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
NOTE
• If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS recorder, the external source's
indication changes (e.g., from "HDMI 1" to "HDMI 1 (Sub)").
20
AQUOS AUDIO speaker system

Optical audio cable
Connecting an AQUOS BD
player/AQUOS recorder
only
AQUOS BD player/AQUOS recorder
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV's remote control
unit.
1 Press a/b to select the input source of the
connected HDMI device you want to control
using the TV's remote control unit, and then
press ;.
Press c/d to select "On", and then press
2
;.
Using genre info
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.