Basic adjustment
Analogue setting
You can reconfigure the analogue TV channels settings
automatically or manually.
E
Additional search
Use this menu to add new services automatically after
"Analogue search" in the "Auto installation" menu has
been completed.
•
Start searching channels after selecting the colour system and
sound system.
E
Manual adjust
Use this menu to set up analogue TV channels manually.
After selecting "Yes" on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
•
Adjust while checking the background picture as a reference.
Instead of pressing c/d to adjust the frequency, you can set
•
by directly entering the frequency number of the channel with
0_9 numeric buttons.
EXAMPLE
•
179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
•
Colour sys.
Select the optimum colour system to receive ("Auto",
"PAL", "SECAM").
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive ("B/G", "D/K", "I", "L/L'").
Label
When a TV channel sends its network name, the "Auto
installation" detects the information and assigns a
name to it. However, you can change channel names
individually.
1
Press a/b/c/d to select each character of
the new name for the channel, and then press
;.
2
Repeat step 1 above until the name is fully
spelt out.
NOTE
•
The name can be five characters or less.
•
If a channel name is less than five characters, select "END" to
set the channel name.
Skip
Channels with "Skip" set to "On" are passed over when
using :r/s even if selected while watching the image
from the TV.
Decoder
When connecting a decoder to the TV, you need to select
"EXT 1" or "EXT 2".
NOTE
•
The factory preset value is "Off".
Lock
You can block the viewing of any channel.
NOTE
•
See "Child lock" for setting a PIN.
•
When "Lock" is set to "On" for a channel, "Child lock has been
activated" displays, and the image and sound of the channel
are blocked.
When pressing 6 while "Child lock has been activated"
•
displays, the PIN input window will display. Inputting the correct
PIN unlocks the "Child lock" temporarily until the power is
turned off.
E
Sort
Channel positions can be sorted freely.
1
Press c/d to select "Yes", and then press
;.
Press a/b/c/d to select the channel you
2
want to move, and then press ;.
Press a/b/c/d to move it to the desired
3
position, and then press ;.
4
Repeat steps 2 and 3 until all desired channels
are sorted.
E
Erase programme
Channels can be erased individually.
1
Press c/d to select "Yes", and then press
;.
Press a/b/c/d to select the channel you
2
want to erase, and then press ;.
•
A message window pops up.
Press c/d to select "Yes", and then press
3
; to erase the selected channel. All the
subsequent channels move up.
4
Repeat steps 2 and 3 until all desired channels
are erased.
29