Connections - Nilfisk-ALTO POSEIDON 7-52 Operating Instructions Manual

4 Operation and Use
4.1

Connections

4.1.1 Connecting the spray
pipe to the spray gun
4.1.2 Connecting the high-
pressure hose and the
water hose
A
C
B
3
1 2
1. Pull the blue quick-release
grip of the spray gun for-
wards and lock it by turning
it to the left.
2. Insert the nipple of the spray
pipe into the quick-release
connection and turn the blue
quick-release grip to the
right.
3. Pull the spray pipe (or
other accessory) forwards
to check that it is securely
attached to the spray gun.
NOTE!
Always remove any dirt from
the nipple before connecting
the spray pipe to the spray gun.
1. Connect the high-pressure
hose with the quick-release
connection to the high-pres-
sure connection.
NOTE!
The maximum permissible wor-
king pressure and temperature
are printed on the high-pressu-
re hose.
Use max. 50 m hose.
2. Before connecting the water
hose to the cleaner, rinse
the water hose briefl y to pre-
vent sand and other dirt from
entering into the cleaner.
3. Use the quick-release con-
nection to attach the water
hose to the water connec-
tion.
4. Open the tap.
(continued -->)
29