Inserting/Removing An Sd Card - Panasonic VDR-D50 Operating Instructions Manual

6
Before using
Caution:
If the SD card is inserted or removed while the power is on, this unit may malfunction or the data
recorded on the SD card may be lost.
1
Set the mode dial to OFF and
remove the battery.
≥ Check that the status indicator has gone off.
2
Open the SD card slot cover.
3
Insert/remove the SD card.
≥ Press the SD card straight in as far as it will go.
≥ Press the centre of the SD card and then pull it
straight out.
4
Securely close the SD card slot
cover.
Inserting/removing an SD
card
2
1
B
A
A Label side
SD card access lamp [ACCESS
CARD] B
≥ When this unit is processing data, the lamp
lights up.
≥ When lamp is on, do not:
sRemove the SD card
sOperate the mode dial
sRemove the battery or disconnect the
AC adaptor
≥ Performing the above while lamp is on may
result in damage to data/SD card or this
unit.
23
LSQT1328