Using On-Screen Menus - Panasonic SC-HT623 Operating Instructions Manual

Using on-screen menus

(Refer to page 10 for remote control button positions.)
1
DISPLAY
Press once.
(When pressed twice, the elapsed
play time indicator appears ➜
below.)
Items shown differ depending on
the type of software.
Main Menu
Program To start from a specific item
Group
Title
Chapter
Track
Playlist
Content
To skip incrementally or decrementally
(Time Slip)
1 Press [ENTER] twice to show Time Slip
Time
2 Press [3,4] to select the time and press
To start from a specific time (Time Search)
To change remaining/elapsed time display
(➜ page 14)
[WMA] [MP3]
Audio
To display the current bitrate or sampling
frequency
∫Elapsed play time indicator
(Except [JPEG])
Condition—play, pause, or slow/search
Other Settings
[DVD-A] (Motion picture part) [RAM] [DVD-V]
To change play speed
– from k0.6 to k1.4 (in 0.1 unit steps)
≥After you change the speed
Play Speed
∫ Play Menu
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
Repeat (➜ page 15)
A-B Repeat (➜ page 14)
RQTC0047
18
2
Return to the
previous menu
Select the menu.
indicator.
[ENTER].
≥Press and hold [3,4] to alter faster.
Current playback item
– Output is in stereo.
– Sampling frequency of 96 kHz is converted
to 48 kHz.
3
Select
Go to the
next menu
ENTER
ENTER
Register
Make the settings.
Still Picture
Thumbnail
Subtitle
Marker (VR)
Angle
Rotate Picture
Slideshow
Current position
Press [3,4] to select the elapsed
play time or the remaining time.
Marker
4
Select 1 2 3
4 5 6
7 8 9
Register
0 10
Press twice to exit.
To switch still picture
To show thumbnail images
(➜ page 14)
[RAM]
To recall a marker recorded on DVD-Video
recorders
To recall a marker: [3,4] ➜ [ENTER]
(with multiple angles)
To select the angle
To rotate pictures
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
Except [RAM]
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept
markers.)
To mark a position: [ENTER] (at the desired
point)
To mark another position: [2,1] ➜ [ENTER]
To recall a marker: [2,1] ➜ [ENTER]
To erase a marker: [2,1] ➜ [CANCEL]
≥This feature does not work during program
and random play.
DISPLAY