Step 5 Radio And System Connection; Southeast Asia And Singapore - Panasonic SC-HT623 Operating Instructions Manual

5
STEP Radio and system connection
System cable
≥Connect the AC mains lead after all other connections are complete.
≥Optional antenna connections (➜ page 23).
FM indoor antenna
Adhesive tape
Fix the other end of the antenna
where reception is best.
Main unit
FM ANT FM ANT
(75 ) (75 )
AM ANT L L
AM ANT
SIGNAL EARTH SIGNAL EARTH LOOP LOOP
R R
EXT EXT
A
Catch up
To disconnect
Press the catch
and pull out.
System cable
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 1 W). To save power when the unit is not to be used for
a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the unit.
6
STEP The remote control
Remote control
2 Insert so the poles (i and j) match
those in the remote control.
3
R6/LR6, AA, UM-3
AM loop
antenna
AM loop antenna
Stand the antenna up on its base.
Place the antenna where the
reception is best.
Keep loose antenna cable away from
other wires and cables.
Click!
Black
1
Red
White
2
COMPON
LINE TV VCR/
(NTSC:480
OUT AUDIO AUX
P
IN IN B
3
P
R
Loosen with a
Black
Phillips-head
screwdriver.
4
Tighten again.
Batteries
1
≥Do not use
rechargeable type
batteries.
FM indoor
antenna
\Southeast\Asia,\Singapore]and]United[
[Arab\Emirates]
Before connecting the
AC mains lead
Set the voltage.
Active
Use a flat-head screwdriver to turn
subwoofer
the voltage selector on the back of
the active subwoofer to the
appropriate position for the area in
which this system is used.
If the power supply in your area is
115 V or 120 V, please set the voltage
selector as follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
To disconnect
Press the catch
Catch up
and pull out.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor (➜ page 10), avoiding obstacles, at a maximum
range of 7 m directly in front of the unit.
AC mains lead
AC mains lead
To household mains socket
RQTC0047
9