Tele Macro Function - Panasonic VDR-D250EP Operating Instructions Manual

LSQT1019(ENG).book 67 ページ ２００６年２月３日 金曜日 午後４時３７分

Tele macro function

This is for bringing only what you want to record into focus to take close-ups.
By focusing only on the subject and blurring the background, the image can be impressive.
VDR-D300 The unit can focus on the subject at a distance of approx. 50 cm.
VDR-D250 The unit can focus on the subject at a distance of approx. 40 cm.
¬ Rotate the mode dial to select
1 Press the joystick. Then move the joystick down
to display the icon shown in the illustration.
2 Move the joystick right to select [
≥ If the magnification is 10k or less, then it is automatically set to
10k.
To cancel the tele macro function
Select [ ] again.
≥ If a sharper focus cannot be achieved, adjust the
focus manually. (l 77)
Various recording functions
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
or .
].
≥ In the following cases, the tele macro function is
cancelled.
– The zoom magnification becomes lower than
10k.
– The power is turned off or the mode dial is
operated.
2/3 NEXT
2/3 NEXT
67
LSQT1019