Tele Macro Function; Colour Night View Function - Panasonic SDR-H280 Operating Instructions Manual

Tele macro function

This is for bringing only what you
want to record into focus to take
close-ups.
By focusing only on the subject and blurring the
background, the image can be impressive.
The unit can focus on the subject at a distance of
approx. 50 cm.
¬ Rotate the mode dial to select
.
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick right to select
[ ].
≥ If the magnification is 10k or less, then it is
automatically set to 10k.
To cancel the tele macro function
Select [ ] again.
≥ If a sharper focus cannot be achieved, adjust
the focus manually. (l 47)
≥ In the following cases, the tele macro function
is cancelled.
jThe zoom magnification becomes lower than
10k.
jThe power is turned off or the mode dial is
operated.
[HDD] [SD]
or
2/2 NEXT 2/2 2/2 NEXT NEXT
2/2 NEXT 2/2 2/2 NEXT NEXT

Colour night view function

This allows recording in dark
locations.
This function allows you to record colour subjects
in dark locations to stand out against the
background.
Attach this unit to a tripod, and you can record
images free from vibration.
≥ Minimum required illumination: approx. 1 lx
≥ Recorded scene is seen as if frames were
missed.
¬ Rotate the mode dial to select
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick up to select
[ ].
≥ If it is difficult to focus, adjust the focus
manually. (l 47)
To cancel the colour night view function
Select [ ] again.
≥ The colour night view function makes the
signal charging time of CCD up to
approximately 25k longer than usual, so that
dark scenes can be recorded brightly. For this
reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.
Recording
[HDD] [SD]
.
2/2 NEXT 2/2 2/2 NEXT NEXT
2/2 NEXT 2/2 2/2 NEXT NEXT
43
LSQT1361