With A Printer (Pictbridge) - Panasonic VDR-D250EP Operating Instructions Manual

LSQT1019(ENG).book 115 ページ ２００６年２月３日 金曜日 午後４時３７分

With a printer (PictBridge)

To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
≥ Use the AC adaptor to free you from worrying about the battery running down.
¬ Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select
1 Press the MENU button, then select [
# [ USB FUNCTION] # [PictBridge] and press
the joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
The [ ] indication appears on this unit's
screen.
≥ If the [ ] indication does not appear or
continues to flash, disconnect and then reconnect the
USB cable or check the printer, SD card and settings on
this unit.
≥ Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
.
SETUP]
With a printer (PictBridge)
(SD)
A
115
LSQT1019