Editing; Dubbing A Tape - Sony Handycam DCR-TRV530 Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
Before operation
• Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
• Press the following buttons to make the indicators disappear so that they will not be
superimposed on the edited tape:
– DISPLAY on your camcorder
– DATA CODE on the Remote Commander
– SEARCH MODE on the Remote Commander
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Set the input selector on the VCR to LINE. Refer to the operating instructions
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
You can edit on VCRs that support the following systems:
8 mm,
60
the recorded tape into your camcorder.
of your VCR for more information.
Refer to the operating instructions of your VCR for more information.
Hi8, VHS,
ED Betamax,
S VIDEO
AUDIO / VIDEO
S-VHS,
mini DV, DV or
IN
S VIDEO
VIDEO
AUDIO
VHSC, S-VHSC,
Digital8
Betamax,