Viewing Images - Sony Handycam DCR-TRV530 Operating Instructions Manual

Viewing images using your computer

Viewing images

For Windows 98 users
(1) Turn on the power of your computer and allow Windows 98 to load.
(2) Connect one end of the USB cable to the
(3) Insert a "Memory Stick" into your camcorder, and connect the AC power
(4) Set the POWER switch to MEMORY.
(5) Open "My Computer" on Windows 98 and double click the newly recognized
(6) Select and double-click the desired image file from the folder. Double-click the
Unplug the USB cable/Eject the "Memory Stick"
To unplug the USB cable or eject the "Memory Stick", follow the procedure below.
For Windows 2000 users
(1) Move the cursor to the "Unplug or Eject Hardware" icon on the TaskTray and
(2) A message to remove the device from the system appears, then unplug the
For Macintosh users
(1) Quit application programs opened.
(2) Drag and drop the "Memory Stick" icon to the Trash or select Eject under the
(3) Eject the "Memory Stick."
112
other end to the USB connector on your computer.
adaptor to your camcorder and then to a wall outlet.
"PC MODE" appears on the screen of your camcorder.
drive. (Example: "Removable Disk (D:)")
The folders inside the "Memory Stick" are displayed.
folder or the file in the following order.
"Dcim" folder t "100msdcf" folder t Image file
For the detailed folder and file name, see "Image file storage destinations and
image files" (p. 113).
(USB) jack
Push in until
the connector
clicks into place
click to cancel the applicable drive.
USB cable or eject the "Memory Stick."
Make sure that the access lamp of the hard disk does not lit.
Special menu.
(USB) jack on the camcorder and the
USB cable
USB connector