Sony Handycam DCR-TRV530 Operating Instructions Manual page 101

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed images on a "Memory Stick" as a still
image
Before operation
Insert a "Memory Stick" is recorded still images into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the left
position.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the still image you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving image.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM
M. LUMI
C. CHROM
The fewer bars there are on the screen, the stronger the effect.
(7) Press PHOTO deeper to start recording.
2
MEMORY MIX
M. CHROM
100–0021
Still image
3
– The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
– The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
– The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
4
5
6
1
M. LUMI
M. LUMI
M. LUMI
100–0021
I I I • • • •
100–0021
I • • • • • •
100–0021
101