Temperature Gauge - SSANGYONG KORANDO 2005 Owner's Manual

3–8 INSTRUMENTS AND CONTROLS
ODOMETER AND TRIP
ODOMETER
By pressing the reset button (arrow), the
display mode changes as shown in order.
TRIPA TRIPB
A/T equipped vehicle
M/T equipped vehicle
8
K140_RHD_EN_03.p65
Mode Changes
When pressing the reset button located in
the right and lower area of odometer once,
the first driving distance (TRIP A) will be
indicated. If pressing it again, the second
ODO
driving distance (TRIP B) will be indicated.
When pressing it once more, total distance
(ODO) will be indicated.
• Trip Odometer
Driving distance in a specific range
(unit: 0.1 km, 0 ~ 999.9 km)
• Odometer
Total driving distance
(unit: 1 km, 0 ~ 999999 km)
Trip Odometer Reset
To reset, press the reset button for 3 or 4
seconds.

TEMPERATURE GAUGE

The temperature gauge indicates the tem-
perature of engine coolant when the ignition
switch is in the "ON" position.
• H : hot
• C : cool
CAUTION
The engine can overheat.
• If the pointer reaches the red zone,
stop the vehicle.
• Allow engine to cool.
2004-11-11, ¿ÀÈÄ 4:08