License Plate Lamps - SSANGYONG KORANDO 2005 Owner's Manual

7–36 SERVICE AND MAINTENANCE

LICENSE PLATE LAMPS

Bulb Replacement:
1. Remove the two screws and the lamp
assembly.
2. To remove the bulb holder from the lamp
housing, rotate the bulb holder counter-
clockwise.
3. Pull the bulb holder out of the lamp hous-
ing.
4. Press the bulb inward and rotate it
counter clockwise to remove it from the
bulb holder.
5. Install a new bulb into the holder by
pressing it in and rotating it clockwise.
6. Install the bulb holder into the lamp hous-
ing by rotating the bulb holder clockwise.
7. Replace the lamp assembly.
36
K140_RHD_EN_07.p65
HIGH-MOUNTED STOP LAMP
(FOR VEHICLES WITH METAL
ROOF)
Bulb Replacement:
1. Open the tailgate.
2. Remove the two screws and the lamp
cover.
3. Press the bulb inward and rotate it coun-
terclockwise or clockwise to remove it
from the bulb holder.
4. Replace the bulb.
5. Replace the lamp cover.
6. Close the tailgate.
HIGH-MOUNTED STOP LAMP
(FOR VEHICLES WITH CANVAS
ROOF)
Bulb Replacement:
1. Remove the two screws and the lamp
assembly.
2. Rotate the bulb holder counterclockwise.
3. Pull the bulb holder out of the lamp hous-
ing.
4. Press the bulb inward and rotate it coun-
terclockwise to remove it from the bulb
holder.
5. Install a new bulb into the holder by
pressing it in and rotating it clockwise.
6. Install the bulb holder into the lamp hous-
ing by rotating it clockwise.
7. Replace the lamp assembly.
2004-11-11, ¿ÀÈÄ 4:09