Table of Contents
Advertisement
HEADLAMPS
Bulb Replacement:
1. Open the hood.
2. Disconnect the wiring harness
connector
from the rear of the bulb
1
by pressing the upper part of the wiring
harness connector.
3. Rotate
the
headlamp
counterclockwise.
4. Remove the headlamp cap.
5. Remove the bulb
.
3
6. Install the proper replacement headlamp
bulb.
7. Reinstall the headlamp cap.
8. Reconnect
the
wiring
connector.
33
K140_RHD_EN_07.p65
CAUTION
Greasy fingers will cause stains, re-
sulting in a dull light.
• Do not touch halogen bulbs with
bare hands.
• Clean with a clean non fluffy cloth
cap
using alcohol or white spirits.
2
harness
3
2
1
SERVICE AND MAINTENANCE 7–33
FRONT COMBINATION LAMPS
(TURN SIGNAL LAMPS AND
POSITION LAMPS)
Bulb Replacement:
1. Remove the two screws and the two
nuts.
2. Remove the lamp assembly.
3. Rotate the bulb holder counterclockwise.
4. Pull the bulb holder out of the lamp hous-
ing.
5. Press the bulb inward and rotate it coun-
terclockwise to remove it from the bulb
holder.
2004-11-11, ¿ÀÈÄ 4:09
Hide quick links:
Advertisement
Table of Contents
