Listening/Confirming The Preset Channels; Rds Broadcasting; Enjoying Tv With Unit's Speakers; Surround Sound Effects - Panasonic SC-BFT800 Operating Instructions Manual

Listening/confirming the preset
channels
1
Press [RADIO] to select "FM".
2
Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] [OK].
To select a 2-digit number
e.g., 12: [1] [2].
Alternatively, press [W, X] or [2, 1].

RDS broadcasting

[For[the[United[Kingdom[and[Republic[of[Ireland[
If the station you are listening to is transmitting RDS signals,
"RDS" will light up on the display.
While listening to the radio broadcast
Press [DISPLAY] to display the text data.
PS: Programme service
PTY: Programme type
OFF: Frequency display
NEWS VARIED
AFFAIRS
INFO ROCK M
SPORT M.O.R. M*
EDUCATE LIGHT M
DRAMA CLASSICS
CULTURE OTHER M
SCIENCE WEATHER
* M.O.R. M=Middle of the road music
∫ Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaural broadcasting or monaural
sound is selected.
∫ If noise is excessive
1 Press [SOUND] several times to select "AUTO
STEREO".
2 While the selected mode is displayed on the unit's
display
Press [2, 1] and select "MONO".
The sound becomes monaural.
Select "AUTO STEREO" in step 2 to cancel the mode.
Depending on the broadcast system, stereo or monaural will
be selected.
"MONO" is also cancelled when you change the frequency.
VQT2Z56
30
≥ This setting can be preset for each broadcasting station.
PTY displays
FINANCE
POP M CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
T V Enjoying TV with unit's
speakers
Preparation
Turn on your TV and select the appropriate audio input mode
[ARC, D-IN] to suit the connections to this unit. (

Surround sound effects

You can enhance stereo sources with surround sound effect.
Press [SURROUND] several times to select the
effect.
For more detailed information on this operation, please refer to
the "Enjoying surround sound effects" section on page 24.

Sound modes

You can adjust the mode depending on the source or situation.
1
Press [SOUND] several times to select the
mode.
2
While the selected mode is displayed on the unit's
display
Press [2, 1] and select the desired setting.
COUNTRY
For more detailed information on this operation, please refer to
NATIONAL
the "Changing the sound modes" section on page 24.
OLDIES

Clear-mode Dialog

FOLK M
DOCUMENT
You can make the dialogue stand out from the background
TEST noise and also hear sound as if it is coming from the centre of
the TV.
ALARM
1
Press [SOUND] several times to select
"CLEAR-MODE DIALOG".
2
While the selected mode is displayed on the unit's
display
Press [2, 1] and select "ON" or "OFF".
23)