Listening/Confirming The Preset Channels; Rds Broadcasting; Enjoying Tv With Unit's Speakers; Surround Sound Effects - Panasonic SC-BTT755 Operating Instructions Manual

SCBTT755_350EBGN_VQT2W23.book 32 ページ ２０１０年６月１８日 金曜日 午後４時５８分
Listening/confirming the preset
channels
1
Press [RADIO] to select "FM".
2
Press the numbered buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] [OK].
To select a 2-digit number
e.g., 12: [1] [2].
Alternatively, press [W, X] or [2, 1].

RDS broadcasting

[For[the[United[Kingdom[and[Republic[of[Ireland[
If the station you are listening to is transmitting RDS signals,
"RDS" will light up on the display.
While listening to the radio broadcast
Press [DISPLAY] to display the text data.
PS: Programme service
PTY: Programme type
OFF: Frequency display
NEWS VARIED
AFFAIRS POP M
INFO ROCK M
SPORT M.O.R. M*
EDUCATE LIGHT M
DRAMA CLASSICS
CULTURE OTHER M
SCIENCE WEATHER
* M.O.R. M=Middle of the road music
∫ Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaural broadcasting or monaural
sound is selected.
∫ If noise is excessive
Press [AUDIO] to display "MONO".
The sound becomes monaural.
Press the button again to cancel the mode. "AUTO
STEREO" will be displayed on the main unit. Depending on
the broadcast system, stereo or monaural will be selected.
"MONO" is also cancelled when you change the frequency.
≥ This setting can be preset for each broadcasting station.
VQT2W23
32
PTY displays
FINANCE COUNTRY
CHILDREN NATIONAL
SOCIAL A OLDIES
RELIGION FOLK M
PHONE IN DOCUMENT
TRAVEL TEST
LEISURE ALARM
JAZZ
Enjoying TV with unit's
TV
speakers
Preparation
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN] to suit the connections to this unit. (

Surround sound effects

You can enhance stereo sources with surround sound effect.
1
Press [SURROUND] several times to select
the effect.
2
While "MANUAL" is displayed on the unit's display
Press [2, 1] and select the desired effect.
Surround modes to enjoy TV audio or stereo
sources from all speakers:
≥ DOLBY PRO LOGIC II MOVIE
≥ DOLBY PRO LOGIC II MUSIC
≥ S.SURROUND
For more detailed information on this operation, please refer to
the "Enjoying surround sound effects" section on page 26.

Sound modes

You can adjust the mode depending on the source or situation.
1
Press [SOUND] several times to select the
mode.
2
While the selected mode is displayed on the unit's
display
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to
the "Changing the sound modes" section on page 26.
Making settings for digital
audio input
Select to suit the type of audio from the DIGITAL AUDIO IN
terminals on the main unit.
Press [EXT-IN] several times to select "D-IN"
(DIGITAL IN)
Press [AUDIO].
M1
M2
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥ "M1" or "M2" is not available if "On" is selected in "Digital
Audio Input". ( 40)
Press [STATUS].
CABLE/SATELLITE AUDIO :
Select when an HDMI connected STB is selected on the TV,
"D-IN" input is automatically selected.(
link with the STB").
≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not
output from the HDMI AV OUT terminal.
25)
33, "Setting the audio