Listening To The Radio; Presetting Stations Automatically; Listening/Confirming The Preset Channels; Manual Tuning - Panasonic SC-XH150 Operating Instructions Manual

4
Press [OK]8 to finish the "Easy setup".
≥You can perform this setup anytime by selecting "Easy setup"
in the Setup menu. ( 19)
≥If this unit is connected to a "HDAVI Control 3 or later"
compatible TV via HDMI cable, the menu language and TV
aspect information will be retrieved via VIERA Link.
≥If this unit is connected to a "HDAVI Control 2" compatible TV
via HDMI cable, the menu language information will be
retrieved via VIERA Link.

Listening to the radio

Presetting stations automatically

Up to 30 stations can be set.
1
Press [RADIO]4 to select "FM".
2
Press [MENU]C.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
§ To change the frequency, refer to "Manual tuning"
( below).
3
Press and hold [OK]8.
Release the button when "FM AUTO" is displayed.
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
≥"SET OK" is displayed when the stations are set, and
the radio tunes to the last preset station.
≥"ERROR" is displayed when auto presetting is
unsuccessful. Preset the stations manually (

Listening/confirming the preset channels

1
Press [RADIO]4 to select "FM".
2
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10]2 [1]
Alternatively, press [X, W]@.
≥The FM setting is also shown on the TV display.
If noise is excessive
Press and hold [PLAY MODE]9 to display "MONO".
To cancel the mode, press and hold the button again until
"AUTO ST" is displayed.
≥The mode is also cancelled when you change the
frequency.

Manual tuning

1
Press [RADIO]4 to select "FM".
2
Press [SEARCH6, SEARCH5]? to select the
frequency.
≥To start auto tuning, press and hold [SEARCH6,
SEARCH5]? until the frequency starts scrolling.
Tuning stops when a station is found.
§
below).
[2]
Presetting stations manually
Up to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK]8.
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10]2 [1]
Alternatively, press [X, W]@, and then press [OK]8.
A station previously stored is overwritten when another
station is stored in the same channel preset.

RDS broadcasting

The unit can display the text data transmitted by the radio
data system (RDS) available in some areas.
While listening to the radio broadcast
Press [FUNCTIONS]6 to display the text data.
Each time you press the button:
PS: Program service
PTY: Program type
FREQ: Frequency display
PTY displays
NEWS VARIED
AFFAIRS POP M
INFO ROCK M
SPORT M.O.R. M
EDUCATE LIGHT M
DRAMA CLASSICS
CULTURE OTHER M
SCIENCE WEATHER
§"M.O.R. M"=Middle of the road music
RDS displays may not be available if reception is poor.

Using the START menu

You can select sound effects, desired source, change the
settings, access playback/menus, etc., by using the
START menu.
1
Press [START]B to show the START menu.
≥When using VIERA Link "HDAVI Control", the TV
also turns on when the START menu is displayed.
e.g.
DVD/CD
Input Selection
Setup
Sound
2
Press [3, 4]8 to select an item and press
[OK]8.
≥To exit, press [START]B.
3
Press [3, 4, 2, 1]8 to make the setting and
press [OK]8.
[2]
FINANCE COUNTRY
CHILDREN NATIONAL
SOCIAL A OLDIES
RELIGION FOLK M
§
PHONE IN DOCUMENT
TRAVEL TEST
LEISURE ALARM
JAZZ
Home Cinema
9