Step 2: Connections; Connection To A Tv - Panasonic SC-BFT800 Operating Instructions Manual

STEP 2: Connections

Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.

Connection to a TV

≥This system supports the PCM and the Dolby Digital bitstream input audio. However, for example the system does not support
the DTS bitstream input audio.
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be
displayed properly.
≥ Turn off all equipment before connection.
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to
suit the type of audio from your digital equipment (
∫ HDMI
The HDMI connection supports VIERA Link "HDAVI Control"
( 31) when used with a compatible Panasonic TV.
Basic connection
TV
VIDEO OUT
OPTICAL
[For[the[United[Kingdom[and[Republic[of[Ireland[
e.g.,
VQT2Z56
14
VIDEO IN
OPTICAL
OUT
AUDIO IN
L
R
VIDEO IN
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic's HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
31).
≥ Audio will be output through the system's speakers when
"Off" is selected in "HDMI Audio Output". (
To enjoy TV audio from this home theatre
system's speakers
1 Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
2 Select "DIGITAL IN " or "D-IN" as a source
( 23).
A Video cable (not supplied)
B Optical digital audio cable (not supplied)
If the TV does not have a VIDEO IN terminal, connect using
a Scart adaptor (Scart—VIDEO IN).
A Scart adaptor (not supplied)
B Video cable (not supplied)
40)