Setting Date And Time; Lp Mode - Panasonic NV-VZ18GC Operating Instructions Manual

Setting Date and Time

Since the internal clock of the Movie Camera
has a slight imprecision, make sure to check the
time before recording.
1
Set [CAMERA FUNCTIONS] or
[VCR FUNCTIONS] >>
[DATE/TIME SETUP].
(11)
MENU
(10) MF/
TRACKING/
EXPOSURE
(9)
FOCUS / SET
2
Press the [SET] Button
[YEAR]/[MONTH]/[DATE]/[HOUR]/[MIN.]
and turn the [34] Dial
desired value.
DATE/TIME SETUP
YEAR
MONTH
DATE
HOUR
MIN.
PRESS MENU TO RETURN
≥Year will cycle in the following order:
1980, 1981, ..., 2079, 1980, ...
3
Press the [MENU] Button
setting the date and time.
≥The clock operation starts from [00] second.
≥The Menu will disappear when the [MENU]
Button is pressed again.
≥The clock employs the 24-hour system.
ª Recording with the Date/Time/Title
Superimposed in the Picture
1
Set [CAMERA FUNCTIONS] >>
[TITLE SETUP] >> [DATE/TITLE].
(11)
MENU
MF/
(10)
TRACKING/
EXPOSURE
(9)
FOCUS / SET
2
Press the [SET] Button
desired indication.
≥The indications change in the order 1 to 6.
1 Date and Time > 2 Date >
3 Date, Time and Title >
4 Date and Title > 5 Title >
6 Date and Time with seconds >
1 2
14:30
15.10.2004 15.10.2004
4 5
HOLIDAY HOLIDAY
15.10.2004
3
Press the [MENU] Button
menu.
≥The selected Date/Time/Title Indication
appears.
Before Use
(9)
to select
(10) to set it to a
2004
10
15
14
30
(11) to finish
-48-
(9) to select the
3
14:30 HOLIDAY
15.10.2004
6
14:30:15
15.10.2004
(11)
to exit the
-40 -
Deleting the Date/Time/Title Indication
During recording or when the Movie Camera is
in the Recording Pause Mode, press the
[DATE/TITLE] Button (30) to make the
Date/Time/Title Indication disappear.
DATE/
TITLE
(30)
≥After turning the Movie Camera off and then
on again, the previously selected
Date/Time/Title Indication is no longer
displayed. To make it appear again, press the
(30)
[DATE/TITLE] Button once.
≥Be sure to turn the Movie Camera off before
removing the Battery or disconnecting the AC
Adaptor. Disconnecting the power supply
while the Movie Camera is on erases the
Date/Time/Title Indication stored in memory.

LP Mode

A desired recording speed can be selected with
[REC SPEED] on the [OTHER FUNCTIONS]
Sub-Menu.
If LP Mode is selected, the recording time
becomes 2.0 times longer than that of SP
Mode.
([SP] means Standard Play. [LP] means Long
Play.)