Setting Date and Time
Since the internal clock of the Movie Camera has a slight
imprecision, make sure to check the time before recording.
1
Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [ON].
2
Press the [PUSH] Dial to select [YEAR]/[MONTH]/
[DAY}/[HOUR}MIN.] and turn to set it to a desired
value.
Year will cycle in the order shown below.
2000, 2001, ..., 2089, 1990, ...
3
Press the [MENU] Button to finish setting the date
and time.
The clock operation starts from [00] second.
The Menu will disappear when the [MENU] Button is pressed
again.
lf the built-in battery is weak, the [@] Indication (1) flashes. In this
case, charge the built-in battery.
@The-clock employs the 24-hour system.
WARNING
THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE
REPLACED BY QUALIFIED PERSONNEL. WHEN NECESSARY,
CONTACT YOUR LOCAL PANASONIC SUPPLIER.