Table of Contents
Advertisement
≥When the LCD Monitor is opened, the
Viewfinder is disabled automatically. However,
when the LCD Monitor is rotated frontward, the
image is also shown in the Viewfinder.
≥If you prefer to have the image on the LCD
Monitor to look like an image in a mirror, set
[SELF SHOOT] on the [DISPLAY SETUP]
Sub-Menu to [MIRROR]. However, images are
recorded normally and no left and right
reversal occurs.
≥In the [MIRROR] mode, only the basic
indications, such as the Recording Indication
[¥], Recording Pause Indication [;¥] and
Remaining Battery Power Indication [x],
are displayed.
≥If a general Warning/Alarm Indication [°]
appears, return the LCD Monitor to the original
position in order to check the specific content
of the Warning/Alarm Indication.
ª To Finish the Recording
Set the [CAMERA/OFF/VCR] Switch
[OFF].
≥For other notes concerning this item, see
Zoom In/Out Functions
It gives special effects to the scene by recording
objects close by or with wide-angle shot.
1
For wide-angle shots (zoom out):
Push the [W/T] Lever
(32)
For close-ups (zoom in):
Push the [W/T] Lever toward [T].
sVOLr
(32)
W
T
≥Zoom Magnification Indication is displayed
for a few seconds.
[W]
1
[T]
ª To Take Close-up Shots of Small
Subjects
(Macro Close-up Function)
When the zoom magnification is 1k, the Movie
Camera can focus on a subject that is as close
as approximately 5 mm from the Lens. With this,
small subjects like insects can be recorded.
≥For other notes concerning this item, see
Super Image Stabilizer Function
If the Movie Camera might be shaken while
recording, the camera shake in the image can
be corrected.
≥If the Movie Camera shakes too much, this
function may not be able to stabilize images.
Camera Mode
(34)
to
.
-55-
toward [W].
10
18
.
-55-
-42 -
1
Press the [SIS] Button
SIS
(14)
≥The [[] Indication appears.
To Cancel Image Stabilizer
Press the [SIS] Button
(14)
≥For other notes concerning this item, see
Backlight Compensation Function
This prevents a recording subject from being
recorded darker in backlight. (Backlight is the
light that shines from behind a recording
subject.)
Under some conditions, this function may not
work properly.
1
Keep the [BLC] Button
s SEARCH
S
6
∫
≥The entire screen becomes brighter.
Fade In/Out Functions
ª Fade In
Fade In brings out images gradually from a
black screen at the beginning of a scene.
≥Sounds do not fade in.
1
Set [CAMERA FUNCTIONS] >>
[FADE SETUP] >> [DIGITAL FADE] >>
[OFF].
(11)
MENU
(10)
MF/
TRACKING/
EXPOSURE
(9)
FOCUS / SET
(14)
.
again.
.
-55-
(20)
pressed.
SEARCH r
5
;W.B
1
TBC
BLC
(20)
Hide quick links:
Advertisement
Table of Contents
