Table of Contents
Advertisement
In the Following Recording Situations, the
Motion Sensor May Not Work Correctly:
≥A white wall or another single-colour
background behind the subject.
≥A subject with horizontal, vertical or oblique
stripes.
≥Sudden changes in the surrounding
brightness.
≥Exposure of the Movie Camera to slight
shocks or vibration.
≥Extremely slow or fast movement of the
subject.
≥Very little movement of the subject.
≥Recording in a dimly lit place. (The
[MOTION SENSOR] Indication flashes.)
≥A very small subject.
≥Movement of the subject near the edge of the
picture.
≥A background with horizontal or vertical
stripes.
ª 0 Lux Night View Function
≥The 0 Lux Night View Function should not be
used in brightly-lit places, and the Movie
Camera should not be directed toward the
sun. Otherwise, irreparable damage may
occur.
≥Scenes taken by the 0 Lux Night View
Function are played back in black and white.
≥When recording with the 0 Lux Night View
Function, adjusting the white balance is not
possible.
≥While the 0 Lux Night View Function is
operating, you cannot use any of the
Programme AE Modes.
≥When the 0 Lux Night View Function is in use,
the subject should be within 3 metres of the
Movie Camera.
≥When the automatic focusing is not precise,
adjust the focus manually. (
the Manual Focus Mode is activated when the
[FOCUS] Button is pressed even if the [AUTO]
Indication is displayed.)
≥If the Motion Sensor Function is used with the
0 Lux Night View Function, the
[MOTION SENSOR] Indication may flash, and
you may not be able to record properly.
≥If you change the setting of the
[0 LUX OFF/ON] Switch during recording, a
switching noise is also recorded.
≥As the iris is fully opened in the 0 Lux Night
View Mode, subjects in white or other light
colours may be recorded whitish, blurred and
with weak contrast.
ª Title Indication Function
≥When a large-size title is displayed, some
indications do not appear even if the
corresponding modes are activated.
≥Even if you set [SIZE] on the [TITLE SETUP]
Sub-Menu to [LARGE], the large [RECORD]
and [PAUSE] Indications, which usually
appear briefly when you start or stop
recording, do not appear.
≥The Date/Time/Title Indication remains
displayed when you exit the [TITLE SETUP]
Sub-Menu after having change the type of
Date/Time/Title Indication (
of the title, the title itself, the size of the title or
the colour of the title.
Others
) (In this case,
-44-
), the language
-40-
-57 -
ª TBC Function
≥When you play back a cassette with stretched,
shrunk or otherwise damaged tape, the TBC
Function does not work correctly (it may
repeatedly turn on and off). In this case,
cancel the TBC Function.
In the following cases, the TBC Function
does not work:
≥In the Cue, Review or Still Playback Mode
≥When using the Camera Search or Recording
Check Function
≥When adjusting the tracking
≥When playing back an unrecorded part on the
tape
ª Manual Tracking Adjustment
≥The Tracking Adjustment Function is
automatically cancelled when the
[TRACKING] Dial is not turned for 5 seconds.
≥It may not be possible to remove the noise
bars completely.
≥It is not possible to adjust the tracking when a
menu is displayed.
≥If you eject the cassette after adjusting the
tracking, the adjusted setting is cancelled.
ª Finding a Scene You Want to Play
Back
≥In the Cue, Review and Still Playback Modes,
horizontal noise bars appear in the picture, or
the picture may become black and white or
distorted.
≥The horizontal noise bars have a different
pattern in the SP Mode and LP Mode.
≥During Cue or Review Playback, no
indications are displayed.
≥The sound is muted during search.
ª Playback Digital Effect Functions
≥If you set the [CAMERA/OFF/VCR] Switch to
[OFF] and then set it to [VCR] again, the
previously selected Playback Digital Effect is
automatically cancelled.
ª Playback Digital Fade
≥If you set the [CAMERA/OFF/VCR] Switch to
[OFF] and then set it to [VCR] again, the
previously selected Playback Digital Fade is
automatically cancelled.
ª Audio Dubbing
≥It is not possible to perform Audio Dubbing on
an unrecorded part of the tape. If you try to do
so, the tape will stop.
≥It is not possible to set [AUDIO DUBBING] on
the [OTHER FUNCTIONS] Sub-Menu to [ON]
when it is not in the Still Playback Mode.
≥When using the Audio Dubbing Function, the
picture quality is somewhat reduced. However,
it does not affect the recorded picture.
≥If you set the tape counter back to 0 at the
position where you want to stop Audio
Dubbing so as to make it possible to use the
Memory Stop Function (
-54-
terminated automatically when the tape
reaches this position.
ª Insert Editing
≥It is not possible to set [INSERT] on the
[OTHER FUNCTIONS] Sub-Menu to [ON]
when it is not in the Still Playback Mode.
), Audio Dubbing is
Hide quick links:
Advertisement
Table of Contents
