No Show Function; P-Timer Function; Sound Adjustment - Sanyo PLC-XU30 Owner's Manual

Press NO SHOW button on Remote Control Unit to black out the
image. To restore to normal, press NO SHOW button again or press
any other button.
Press P-TIMER button on Remote Control unit. The timer display "00
: 00" appears on the screen and the timer starts to count time (00 : 00
~ 59 : 59).
To stop P-TIMER display, press P-TIMER button. And then, press P-
TIMER button again to cancel P-TIMER function.
DIRECT OPERATION
Volume
Press VOLUME (+/–) button(s) on Top Control or on Remote Control
Unit to adjust volume. Volume dialog box appears on the screen for a
few seconds.
(+) button to increase volume, and (–) button for decreasing.
Mute
Press MUTE button on Remote Control Unit to cut off sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–) button(s).
MENU OPERATION
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SOUND Menu icon.
2 Press POINT DOWN button to move a red frame pointer to the
item that you want to select, and then press SELECT button.
Volume
To increase volume, press POINT RIGHT button, and press POINT
LEFT button for decreasing.
Mute
Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box
display is changed to "On" and sound is cut off. To restore sound to
its previous level, press POINT LEFT/RIGHT button(s) again.

NO SHOW FUNCTION

P-TIMER FUNCTION

SOUND ADJUSTMENT

BASIC OPERATION
No show
Message disappears after 4 seconds.
Indicates roughly level of
volume.
Press MUTE button to set
Mute function On or Off.
The display disappears after 4 seconds.
SOUND MENU
Indicates roughly
level of volume.
Close SOUND Menu.
SOUND Menu icon
21