Chicago Electric 91222 Assembly And Operating Instructions Manual page 9

Handle
The grinder comes with a SIDE HANDLE (#29)
which can be screwed into either side of the
grinder. (refer to Figure 1.)
Installing Wheels
Warning:
Always disconnect from power source
before adding or removing accessories.
Use a cloth or glove to protect hands
from abrasion.
Spindle
(#5)
Reversible
Inner Flange
(#3)
Grinding
Wheel
(#2)
Step 1: Using the WRENCH (#28) (refer to Figure 2), loosen the WHEEL NUT (#1) by turning it counter
clockwise.
Note: Ensure that the correct side of the REVERSIBLE INNER FLANGE (#3) is up to provide the
correct fit when the WHEEL NUT (#1) is tightened.
Step 2: Place the new GRINDING WHEEL (#2) on the SPINDLE (#5) against the REVERSIBLE INNER
FLANGE (#3).
Step 3: By hand, screw the WHEEL NUT clockwise back onto the SPINDLE, then tighten with the
WRENCH.
SKU 91222
Figure 2 — Installing Wheels
Figure 1 — Attaching Side Handle
Wheel Nut
(#1)
Wrench
(#28)
Side Handle
(#29)
REV 02/07
Page 9