Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock; Setting The Date And Time; Handset Operation - Siemens Gigaset C345 Operating Instructions Manual

Handset operation

u
After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Your telephone is now ready for use
The answering machine is switched on
with a pre-recorded announcement.
¤
Set the date and time (page 8) to
ensure that incoming calls are logged
with the correct time.
Activating/deactivating
the handset
a
Press the end call key and
hold. You hear the confirma-
tion beep.
Activating/deactivating
the keypad lock
#
Press the hash key long.
You hear the confirmation beep. The icon
Ø appears in the display when the keypad
lock is activated.
The keypad lock deactivates automatically
when you receive a call and activates
again after the call.
Note:
The handset displays an advisory message if
you press a key by accident while the keypad
lock is on. To deactivate the keypad lock, press
#
the hash key long.

Setting the date and time

¢ ¢
Settings
§Menu§
~
Enter the day, month and year
with 6 digits and press
Use q to move between the
fields.
~
Enter hours and minutes with
4 digits (e.g. Q M 1 5 for
07:15) and press
to move between the fields.
8
Date/Time
.
§OK§
. Use q
§OK§
Handset operation

Control key on the handset

§§§§INT§§§ §§Menu
1 Display functions
2 Control key
In these instructions, the side of the con-
trol key that you must press in the given
operating situation is shown in black (top,
bottom, right, left). Example: t for "press
the top of the control key".
The control key has a number of different
functions:
When the handset is in the idle state
s
Open the directory.
t
Adjust the ringer melody vol-
ume of the handset (page 35).
In lists
t / s
Scroll up/down line by line.
In menus
t / s
Scroll up/down line by line.
In an input field
t / s
Move the cursor left or right.
During an external call
s
Open the directory.
t
Adjust loudspeaker volume for
earpiece and handsfree mode.
Using display functions
The current display functions are shown
reverse highlighted in the bottom display
line.
u / v
Launch left / right display func-
tion.
1
2