Using The Timer; Restoring The Handset Default Settings; Base Station Settings; Access Control - Siemens Gigaset C345 Operating Instructions Manual

Base station settings

Activating/deactivating key beep/
acknowledge tones
¢
Audio Settings
§Menu§
Select
Key Tones
and press
Tone
Setting the battery low beep
¢
Audio Settings
§Menu§
¢
Battery Low
/ /
On Off During Call
Select On
press
§OK§
tery low beep is activated/
deactivated/sounds during a
call.

Using the timer

You can use your handset as a timer
(short-term alarm clock). The maximum
time that can be set is 23 hours, 59 min-
utes and 59 seconds.
The timer continues to run during a call.
The timer cannot be started if the room
monitor (page 32) is active.
Starting the timer
¤
Press the timer key.
~
Enter the time in hours, min-
utes and seconds, then
press
§OK§
The timer starts. You can see the remain-
ing time in the display. At the end of the
time you see Countdown
an advisory tone if the timer finishes while
a phone call is in progress.
Press the control key to return
§OK§
to idle status.
Cancelling the timer
The timer is running.
¤
Press the timer key.
Press the control key to con-
§OK§
firm.
36
¢
Advisory Tones
/
Confirmation-
(‰ = on).
§OK§
¢
Advisory Tones
/ Off / During Call and
(‰ = on). The bat-
.
finished. You hear
Restoring the handset
default settings
You can reset individual settings and
changes you have made. Entries in the
directory and in the calls list, the SMS lists,
the handset's registration to the base and
a stored picture or ringer melody will not
be affected. You will find a list of the
default settings in the Appendix, page 43.
¢ ¢
Settings
§Menu§
Handset
Press the control key to con-
§OK§
firm.
a
Long press (idle status).
Cancel the reset with a.
Base station settings
The base station settings are made with a
registered Gigaset C34 handset.

Access control

Protect the system settings of the base sta-
tion with a system PIN known only to you.
The system PIN mustnow be entered for
handset registration/de-registration,
restoring default settings or barging in, for
example.
¢
Handset Reset