Making Calls; Making An External Call; Ending A Call; Answering A Call - Siemens Gigaset C345 Operating Instructions Manual

Making calls

Making an external call

External calls are calls using the public tel-
ephone network.
~ c
Enter the number and press
the talk key.
Or:
c ~ Press the talk key c long and
then enter the number.
You can cancel the dialling operation with
the end call key a.
Notes:
– Dialling with the directory (page 13) or last
number redial list (page 15) saves repeated
keying of phone numbers.
– You can assign a number from the directory
to a key for speed dialling (page 14).

Ending a call

a
Press the end call key.

Answering a call

The handset indicates an incoming call in
three ways: it rings, there is a display on
the screen and the handsfree key d
flashes.
To accept an incoming call:
¤
Press the talk key c.
¤
Press the handsfree key d.
¤
Press the control key
TAD Diversion to divert the call to the
answering machine (page 26).
If the handset is in the base and the
function is activated (page 34), the
Answer
handset will take a call automatically
when you lift it out of the base.
and select
§Menu§
Auto

Caller ID

When you get a call, the caller's number is
shown in the display provided the follow-
ing conditions are met:
u
Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identity): The
caller's number is transmitted
– CLIP (Calling Line Identity Presenta-
tion): The caller's number is dis-
played
u
You have requested CLIP from your net-
work provider.
u
The caller has requested CLI from his
network provider.
Call display with CLIP/CLI
If the caller's number is stored in your
directory, you see his name.
®
1234567890
§Menu
1 Ringer icon
2 Caller's number or name
Instead of the number, you see:
u
External Call, if no number is
transmitted.
u
Withheld, if the caller withholds his ID.
u
Unavailable, if the caller has not
requested caller ID.
Making calls
1
2
11