Siemens Gigaset C345 Operating Instructions Manual page 19

Using the directory and lists
Setting the message key flashing
Requirement: There is still at least one
new entry in one of the lists.
f
Open the calls list.
Select
Set MWI-LED
press
§OK§
a
Long press (idle status).
Key f goes out when a list opens and the
menu is closed.
Calls list
Requirement: CLIP (page 11)
The numbers of the last 30 incoming calls
are stored. Depending on the
tings either All Calls or only
stored (page 16).
Several calls from the same number are
stored depending on the type of list:
u
All Calls stored more than once.
u
stored once (the last call).
Missed Calls
The calls list is displayed as follows:
Calls List: 01+02
Number of new entries + number of old, read
entries
Setting the list type for the calls list
¢
f
Calls List: 01+02
¢
q (select entry; page 13)
¢ ¢
Calls List Settings
§Menu§
Select
Missed Calls
and press
a
Long press (idle status).
The entries in the calls list are retained
when you change the list type.
16
and
.
Calls List Set-
Missed Calls are
/
All Calls
(‰ = on).
§OK§
Answering machine list
With the answering machine list you can
listen to the messages on the answering
machine.
The answering machine list is displayed as
follows:
Answ. Mach.: 01+02
Number of new messages + number of old,
played back messages
Opening the calls list /answering
machine
¢
f
/
Calls List: Answ. Mach.: 01+02
q
Select an entry.
The calls list shows the last received call.
The answering machine list shows the
first new message that has been received.
The playback starts.
New messages are put behind the old
messages when they have been played
back.