If The Memory Becomes Full - Sharp FO-IS115N Operation Manual

•
You can press
To delete a destination, press
7
When you have finished selecting destinations, press
•
If you are broadcasting to fax destinations, transmission will begin.
•
If you are broadcasting to e-mail destinations, you can press
e-mail options (see Steps 4 to 6 on page 45). When you are ready to begin
transmission, press
•
For fax, a Transaction Report is automatically printed out after
Broadcasting is completed. If any destinations in the "Note" column of the
report are marked "Busy" or have a communication error code, you will
need to send the document to those destinations again.

If the memory becomes full...

If the memory becomes full during scanning, [MEMORY FULL] will appear in
the display.
♦
START
Press
memory (the remaining pages will automatically feed out). After
transmission, the memory will be cleared and you can send the remaining
pages. You will also need to send the page which was being scanned when
the memory filled up.
♦
To cancel the entire transmission, press
to scroll through and check your entered destinations.
DEL
START
.
to send the pages which have been stored up to that point in
when it appears.
STOP
.
Broadcasting
START
.
to select
115