Changing The Tray Settings - Sharp MX-5000N Quick Start Manual

Changing the tray settings

When you change the paper in a tray, the tray settings in the system settings must also be changed.
SYSTEM
SETTINGS
System Settings
Total Count Default Settings
Address Control
Paper Tray
Settings
(1)
Printer Condition Document Filing
Settings Control
System Settings
Paper Tray Settings
Tray Settings
(2)
Paper Type Registration
Auto Tray Switching
Custom Size Registration (Bypass)
Tray Settings
Tray 1
Type
Plain
Size B4
Paper Property
Fixed Paper Side Disable Duplex Disable Staple
Feeding Approved Job
Copy Print Fax
System Settings
Tray Settings
Tray: Tray 1
Type:
Recycled
Size:
Auto-AB
A3,A4,A4R,B4,B5,B5R,
216x330(8 1/2x13)
Paper Property:
Print
Copy
I-Fax
Fax
20
1
2
Admin Password Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Back
Back
Change
(3)
Disable Punch
I-Fax Doc. Filing
Cancel OK
(6)
(4)
(5)
Press the [SYSTEM SETTINGS] key.
Configure the tray settings in the touch panel.
(1) Touch the [Paper Tray Settings] key.
(2) Touch the [Tray Settings] key.
(3) Touch the [Change] key in "Tray 1".
(4) Select [Recycled] from the "Type" select box.
(5) Make sure that [Auto-AB] is selected in the
"Size" select box.
For more information, see "Paper Tray Settings" in
"7. SYSTEM SETTINGS" in the Operation Guide.
(6) Touch the [OK] key.
The above steps change the paper settings for tray 1 to
A4 recycled paper.