Sharp MX-5000N Quick Start Manual page 46

Copying an A3 size original without cutting off the
edges (A3 Full Bleed)
Use this feature to make a full-size copy
of an A3 original on A3W paper so that
the edges are not cut off.
The original must be placed on the
document glass.
Copying in the centre of the paper (Centring)
Use this function to position the copy
image at the centre of the paper.
This is convenient when the image is
reduced or copied onto paper that is
larger than the original.
Reversing white and black in a copy (B/W Reverse)
This function reverses black and white
in a copy to create a negative image.
Use this function to save toner when
copying an original with large black
areas.
Adjusting red/green/blue in copies (RGB Adjust)
Use this function to strengthen or weaken red, green, or blue (one colour only) and thereby change the overall hue
of the copy.
An image of this function is shown at the end of this manual.
Adjusting the sharpness of an image (Sharpness)
Use this function to sharpen or soften a copy image.
An image of this function is shown at the end of this manual.
44