Changing The Tray Settings - Sharp MX-7001N Quick Start Manual

Changing the tray settings

When you change the paper in a tray, the tray settings in the system settings must also be changed.
SYSTEM
SETTINGS
System Settings System Settings
Admin Password
Total Count Default Settings
Paper Tray
Address Control
Settings
(1)
Printer Condition Document Filing
Settings Control
System Settings
Paper Tray Settings
Tray Settings
(2)
Paper Type Registration
Auto Tray Switching
Tray Settings
Type Plain
Tray 3
Size Auto-AB
Fixed Paper Side Disable Duplex Disable Staple
Copy Print Fax I-Fax
Type Plain
Tray 4
Size Auto-AB
Fixed Paper Side Disable Duplex Disable Staple
Copy Print Fax I-Fax
System Settings
Tray Settings
Tray: Tray 3
Type:
Recycled
Size:
Auto-AB
A3W(12x18),A3,B4,A4,A4R,A5R,
B5,B5R,216x330(8 1/2x13)
Paper Property:
Fixed Paper Side
Disable Duplex
Disable Staple
Disable Punch
Feeding Approved Job:
18
1
2
Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Back
Back
Change
(3)
Disable Punch
Doc. Filing
Change
Disable Punch
Doc. Filing
Cancel OK
(6)
(4)
(5)
Press the [SYSTEM SETTINGS] key.
Configure the tray settings in the touch panel.
(1) Touch the [Paper Tray Settings] key.
(2) Touch the [Tray Settings] key.
(3) Touch the [Change] key in "Tray 3".
(4) Select [Recycled] from the "Type" select box.
(5) Make sure that [Auto-AB] is selected in the
"Size" select box.
For more information, see "Paper Tray Settings" in the
System Settings Guide.
(6) Touch the [OK] key.
The above steps change the paper settings for tray 3 to
A4 recycled paper.