Changing The Tray Settings - Sharp MX-M1100 Quick Start Manual

Changing the tray settings

When you change the paper in a tray, the tray settings in the system settings must also be changed.
SYSTEM
SETTINGS
System Settings System Settings
Admin Password
Total Count Default Settings
Paper Tray
Address Control
Settings
(1)
Document Filing
Printer Condition
Control
Settings
System Settings
Paper Tray Settings
Tray Settings
(2)
Paper Type Registration
Auto Tray Switching
Tray Settings
Type
Plain
Tray 4
Size Auto-AB
Paper Property
Fixed Paper Side Disable Duplex Disable Reverse
Disable Punch Disable Fold
Feeding Approved Job
Copy
Print Fax I-Fax
System Settings
Tray Settings
Tray: Tray 4
Type:
Recycled
Size:
Auto-AB
Select Similar Sizes for Auto Detection
216x330(8 1/2x13)
A3W(12x18),A3,B4,A4,A4R,
B5,B5R,216x330(8 1/2x13)
Feeding Approved Job:
Print
Copy
18
1
2
Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Back
Back
Change
(4)
Disable Staple
(3)
Doc. Filing
Cancel
OK
(7)
(5)
(6)
Press the [SYSTEM SETTINGS] key.
Configure the tray settings in the touch panel.
(1) Touch the [Paper Tray Settings] key.
(2) Touch the [Tray Settings] key.
(3) Use the key to display the tray settings of
tray 4.
(4) Touch the [Change] key in "Tray 4".
(5) Select [Recycled] from the "Type" select box.
(6) Make sure that [Auto-Inch] is selected in the
"Size" select box.
For more information, see "PAPER TRAY SETTINGS"
in the User's Guide.
(7) Touch the [OK] key.
The above steps change the paper settings for tray 4 to
A4 recycled paper.