Sharp MX-5000N Quick Start Manual page 115

Adjusting the volume of the ringer
Checking the machine's communication record
To check the machine's record of communication using the image send
function, follow the steps below to print the image sending activity report.
The image sending activity report is printed from the system settings
(administrator).
Press the [SYSTEM SETTINGS] key on the operation panel,
and then touch [List Print (Administrator)] - [Image Sending Activity
Report] to print the report.
If the ringing sound made when the machine receives a fax is too loud or too
soft, follow the steps below to adjust the volume.
The fax ringer volume is adjusted in the system settings (administrator).
Press the [SYSTEM SETTINGS] key on the operation panel,
touch [Image Send Settings] - [Fax Settings] - [Fax Default Settings] -
[Speaker Settings] - [Ringer Volume] in that order, and then select the
desired volume.
113