Insert Battery; Charge Battery - Siemens S46 User Manual

12

Insert battery

• Insert battery into the phone
( and ).
• Replace battery cover and push
gently in the direction of the
arrow until it clicks.
Getting Started

Charge battery

The battery is not fully charged when
delivered. To charge your phone's
battery:
• Plug the supplied charger into the
• After charging, disconnect the
device interface at the bottom of
the phone and plug the power
supply into the outlet. (Use only
the charger supplied with your
phone and charge for at least
two hours).
charger from the phone by
squeezing the top and bottom of
the charger connector and pulling
it out of your phone.
Charging
Your phone's display shows the following:
s
When charging is in progress.
r
When charging is complete.
An empty battery is fully charged after
approximately two hours. Charging is only
possible when the temperature is between
41°F and 104°F (5°C and 40°C). (The
charge icon flashes as a warning when the
temperature is above or below the stated
values.) The voltage specified on the power
supply unit must not be exceeded.