Insert Battery; Charge Battery - Siemens mobile phone User Manual

Table of Contents

Advertisement

12.2.02
06-S46 Body.fm
12

Insert battery

• Insert battery into the phone
(
and
).
• Replace battery cover and push
gently in the direction of the
arrow
until it clicks.
i 37 Am Engl, A31008-H5450-A5-1-4A19
Getting Started

Charge battery

The battery is not fully charged
when delivered. To charge your
phone's battery:
• Plug the supplied charger into the
device interface at the bottom of
the phone and plug the power
supply into the outlet. (Use only
the charger supplied with your
phone and charge for at least
two hours).
• After charging, disconnect the
charger from the phone by
squeezing the top and bottom of
the charger cable and pulling it out
of your phone.
Charging
Your phone's display shows the following:
s
r
An empty battery is fully charged after
approximately two hours. Charging is only
possible when the temperature is between
41°F and 104°F (5°C and 40°C). (The
charge icon flashes as a warning when the
temperature is above or below the stated
values.) The voltage specified on the power
supply unit must not be exceeded.
When charging is in progress.
When charging is complete.

Advertisement

Table of Contents
loading

This manual is also suitable for:

S46

Table of Contents