Setup; Profiles - Siemens S46 User Manual

Setup

Preparation of the phone for Internet
access depends on the service pro-
vider currently used:
• If the settings have already been
made by your service provider you
may begin immediately.
• If access profiles have been
assigned by your service provider
select a profile and activate it
(p. 47).
• The access profile must be set
and activated manually (p. 47).
If necessary, check with your service
provider for details.

Profiles

You can set and change up to five ac-
cess profiles (some of these may be
disabled by the service provider). The
entries and functions may vary de-
pending on your service provider. You
can change a profile each time before
you access the Internet
(p. 48).
Profile settings
§Menu§ Surf & fun
Internet
„
Select the profile set.
Edit
The setup menu is
displayed.
„
Select the menu items
one by one and make
your entries.
WAP
Profiles
©
You may get further information
on the entries from your service pro-
vider.
Profile Name the profile or rename a
name: default name.
WAP IP address:
parameters Enter the IP address.
Port:
Enter port number.
Homepage:
Enter the homepage
address (p. 47), if not set by
the service provider.
Linger time:
Enter time in seconds when
a connection should be
terminated if no input or no
data transfer takes place.
CSD / GPRS See page 82.
settings
These are two methods the
phone uses to send/receive
information.
§Edit§
Open menu.
Save
The settings are stored
and the profile list is
displayed.
Special characters (as in the SMS
text editor, p. 37)
*
Press three times for
#
Press three times for
0
Press for .
0
Press repeatedly for :
*
Press repeatedly for ~
/
@
(period)
47