Getting Started; Insert Sim Card/Battery - Siemens CF62 User Manual

of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
left page (16)
16

Getting started

Getting started

Insert SIM card/battery

The service provider supplies you
with a SIM card where all the impor-
tant data for your line is stored. If the
SIM card has been delivered in credit
card size, snap the smaller segment
out and remove any rough edges.
Press grooved area
the cover downwards in the direc-
tion of the arrow
• Place the SIM card in the slot with
the contact surface facing down-
wards. Gently push the holder tab
over the SIM card
beveled corner is correctly
positioned).
1
, then remove
2
.
1
2
3
(ensure the
3
• Insert the battery sideways in the
4
phone , then press downwards
5
until it clicks into place.
4
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place cover on phone and then
push to the top edge, until it clicks
6
into place .
6
Additional information
Please switch off your phone before
removing the battery!
3V and 1.8V SIM cards are supported.
Please contact your service provider if
you have an older card.
SIM card problems .....................page 102
5