Table of Contents
Advertisement
Customer service & product warranty – Australia and New Zealand
The number of the caller is not dis-
played although CLIP has been
set.
Calling Line Identification is not
enabled.
¤ The caller should ask the net-
work provider to enable Calling
Line Identification (CLI).
Refer to the notes on calling line dis-
play (¢ page 27).
You hear an error tone when key-
ing an input.
Action has failed/invalid input.
¤ Repeat the process.
Read the display and refer to the
user guide if necessary.
You cannot listen to messages on
the network mailbox.
Your PABX is set to pulse dialling.
56
Gigaset E310A only:
No time is specified for a message
in the calls list.
Date/time have not been set.
¤ Set the date/time (¢ page 15).
The answering machine reports
"Incorrect PIN!" during remote
operation.
1.
You have entered the wrong sys-
tem PIN.
¤ Enter the system PIN again.
2.
The system PIN is still set to 0000.
¤ Set the system PIN to some-
thing other than 0000
(¢ page 50).
The answering machine will not
record any messages/cancels the
recording of a personal announce-
ment.
The memory is full.
¤ Delete old messages.
¤ Play back and delete new mes-
sages (¢ page 36).
The answering machine only
records part of a personal
announcement.
The announcement contained a
pause of more than 2 seconds.
¤ Avoid pausing when recording an
announcement (¢ page 34).
Exclusion of liability
Some displays may contain pixels
(picture elements) which remain
activated or deactivated. This is
completely normal and does not
indicate a fault.
Advertisement
Table of Contents
