Using The Handset As An Alarm Clock; Using Multiple Handsets; Registering Handsets - Gigaset E310 User Manual

Please note
u When using Eco Mode+ you can
ensure that the range of the
base is sufficient by pressing the
talk key c. You hear the ring
tone if the base can be reached.
u When Eco Mode+ is enabled:
– Call setup is delayed by
approx. 2 seconds.
– Handset standby time is
reduced by approx. 50%.
u Registering handsets that do
not support Eco Mode+ causes
the mode to be deactivated on
the base and all other handsets.
u Activating Eco Mode reduces
the range of the base.
u Eco Mode / Eco Mode+ and
repeater support (¢ page 49)
cancel each other out, i.e., if you
use a repeater, you cannot use
Eco Mode or Eco Mode+.
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
Prerequisite:
The time is set (¢ page 15).
¤ q Alarm Clock ¤
§Menu§
¤ q Activation
¤
§OK§
(‰ = activated)
After you activate the alarm clock,
the menu for setting the wake-up
time opens automatically.

Using the handset as an alarm clock

Setting the wake-up time
§Menu§
¤ q Wake-up time ¤
¤ ~ (Enter wake-up time) ¤
If the alarm clock is activated, you
will see the l icon in the display and
the wake-up time after it.
Ð
l
'
When the alarm clock rings...
Press any key to deactivate the
alarm clock for 24 hours.
If you do not press any key, the alarm
clock switches off after one minute.
Using multiple
handsets

Registering handsets

You can register up to four handsets
on the base.
Registering a Gigaset handset
manually to the Gigaset E310/
E310A
§OK§
You must register the handset man-
ually on both the handset (1) and
the base (2).
Once registration is complete, the
handset returns to idle status. The
internal number of the handset
appears in the display, e.g., INT 1.
¤ q Alarm Clock ¤
Ã
U
INT 1
12:00 10:53
Menu
§OK§
§OK§
§OK§
41