Recall Key; Setting Up Of Dialling Code; Operation On A Pabx; Special Functions/Recall Key - Gigaset DA710 Manual

Withheld number (anonymous call)
If you activate the withheld number function, your number will not be
displayed for the person you are calling.
M
¢ ¢
CLASS

Withhold number

q
Select Activate / Deactivate and confirm with
The withheld number function is activated or deactivated.

Hotline

The network service Hotline allows a special number to be selected sim-
ply by lifting the handset, e.g. in case of emergency. This function is not
available if it is not supported by your network provider.
M
¢ ¢
CLASS Hotline
q
Select Activate / Deactivate and confirm with
The network service Hotline is activated or deactivated.
Call back when busy
If you make a call but the person you are calling is already on the line,
you can arrange an automatic callback as soon as the connection is free.
M
¢ ¢
CLASS

Call back

q
Select Activate / Deactivate and confirm with
The callback is activated or deactivated.
Automatic callback
If your network provider supports automatic callback and you activate
this function, the number of the caller who called you last while your line
was busy will be dialled automatically.
M
¢ ¢
CLASS

Auto recall

q
Select Activate / Deactivate and confirm with
The automatic callback is activated or deactivated.
Network mailbox
If you use a network mailbox, the telephone display shows new incom-
ing messages. The request for the mailbox can be started via the menu.
£
You can also set the LED so that it lights up to indicate incoming mes-
sages ( page 11).
M
¢ ¢
CLASS

Phonemail

The network service number is selected.

Recall key

In public telephone systems the recall key (flash) is required for the use
of various additional services; e.g. for "callback when busy".
If necessary, the flash time on your telephone must be adjusted to the
requirements of the telephone system (

Setting up of dialling code

If necessary you can change the default setting for the area code for your
connection which is saved in the telephone. The number saved here is
then used to display only the number of the person calling without area
code in the call lists, provided that they have the same area code.
M
¢ ¢
Phone setup

Area code

The default number is displayed.
Q O
[
... Enter the new area code (max. 6 digits) and confirm with
.
14
[
.
[
.
[
.
[
.
£
page 14).

Operation on a PABX

Special functions/Recall key

H
During an external call, you can make an enquiry or forward the call. To
do this, press the recall key
on your PABX. To set the recall key, the telephone's flash time must be set
consistently with your PABX. Please refer to the operating instructions
for your PABX.

Changing the dialling mode/flash time

The telephone supports the following dialling modes:
u Tone dialling
u Pulse dialling
Depending on your PABX, you may need to change your phone's dialling
mode or the flash time. (Default setting: Tone dialling)
Changing the dialling mode
M
¢ ¢
Phone setup

Dial mode

q
Select Tone or Pulse and confirm with
Changing the flash time
You can change the flash time if the dialling mode is set to tone dialling
(see above) (default setting 90 ms).
M
¢ ¢
Phone setup

Flash time

q
Select flash time, the following values are available:
90, 120, 270, 375, 600 ms and confirm with
Temporary switch to tone dialling in "Pulse" position
To use functions that require tone dialling (e.g. remote control of
answering machine), you can set the telephone to tone dialling for the
duration of the call.
After the connection is established:
*
Press the star key.
After the connection is terminated, the setting reverts to pulse dialling.

Setting dialling prefixes

If your phone is connected to a PABX, you may have to use a dialling pre-
fix to make external calls. You can save up to three prefixes in your tele-
phone.
If a dialling prefix is recognised during dialling, a dialling pause will auto-
£
matically be applied. You can adjust the time of the dialling pause if nec-
essary ( page 15).
M
¢ ¢
Phone setup

PABX code

The current setting is displayed.
Q O
.... Enter the dialling prefix (1 to 3 digits) and confirm with
Use the control key to switch between the dialling prefixes:
t s
Press the control key up/downwards in order to jump left/
right
. The subsequent procedure depends
[
.
[
.
de en fr nl
[
.