Appendix; Other Settings; Predefined Key Combinations - Gigaset DA710 Manual

Appendix

Other settings

£
In addition to the options described in section Adjusting the tele-
phone ( page 11), you can perform further settings with the help of
Feature codes (e.g. reset the factory settings). These are summarised in
the following table.
Default settings are displayed in bold. If there is no bold value for a set-
ting, the presetting is country-dependent.
M
Press the menu key and 1.
~
[
Enter the key sequence for the Feature code and confirm
with .
Key Value
sequence
02 0 1 s
1 3 s
2 6 s
25 0 Restores all settings to the factory settings
1 Deletes the contents of all programmable direct dial keys
2 Deletes all dialling codes
3 Restores all network service codes
4 Deletes all stored numbers (not phonebook)
50 0 Time display off
1 24 hour format
2 12 hour format
57 0 Deactivate
1 500 ms/500 ms
2 30 ms/70 ms
70 0 Deactivate
1 Activate
83 0 Deactivate
1 Activate
2 Automatic
B
88 1~9 Settings 1-11
1 = minimum contrast
5 = default setting
11 = maximum contrast
91 0 1,5 : 1
1 2 : 1
92 0 85 / 85 ms
1 85 / 110 ms
2 85 / 140 ms
3 110 / 110 ms
4 70 / 70 ms
#2 0 Activate
1 Deactivate
de en fr nl
Description
Sets the length of the pause that
can be inserted with the pause key
Sets the time format
Interval for the LED (hands-free/
headset key) on incoming call
Eliminates click tone at the begin-
ning or end of ringer.
If network transmits only a very
short ringer impuls, the click tone
can be prevented by deactivating
(setting 0) the setting.
Withholds the first ringer. With this
setting, it is possible to determine,
if an incoming call comes from a VIP
number, and to select a VIP ring
tone instead of the normal ring
tone.
Sets the contrast of the display.
Setting 10: Direct dial key 1
Setting 11: Direct dial key 2
Sets the pulse ratio for pulse dial-
ling
Sets signal time/signal pause for
tone dialling
Updates time automatically accor-
ding to CLIP information
Key Value
sequence
#4 0 Ringer
1 AC
B
#6 3~9 Seconds
Settings 3-15
Default setting: 8

Predefined key combinations

The following key combinations are predefined for the activation/deac-
tivation of network services.
Function
Activate call forwarding for all calls (CFU)
Deactivate call forwarding for all calls
Activate call forwarding when no reply (CFNR)
Deactivate call forwarding when no reply
Activate call forwarding when busy (CFB)
Deactivate call forwarding when busy
Activate signalling for call waiting (CW)
Deactivate signalling for call waiting
Activate hotline
Deactivate hotline
<number> This will be replaced by the phone number, which has
£
been specified for the corresponding function in the
menu CLASS (
Description
Start signal for CLIP recognition.
If CLIP does not function with the
default setting 0, select setting
"AC".
Time for termination of an inco-
ming call
Settings 10-15: Press the direct dial
keys 1-5.
Key combination
*21*<number>#
#21#
*61*<number>#
#61#
*67*<number>#
#67#
*43#
#43#
*53*<number>#
#53#
page 13).
15