Setting The Handset Volume; Dialling A Speed Dial Number; Dialling Pauses; Adjusting The Telephone - Gigaset DA310 User Manual

Dialling a speed dial number

c J
Lift the handset, press
Q O
the speed dial key.
... Press the speed dial
number key.
Notes on saving and deleting
programmable direct dial and
speed dial numbers
* #
and are saved regardless
of the set dialling mode but are only
£
dialled with tone dialling mode
( page 5).
If the number entered is longer than
21 digits, the saved number is
deleted.

Dialling pauses

I
One or more dialling pauses can be
entered using
Pauses are transferred to the mem-
ory and are necessary for certain
I
extension systems (e.g.:
0 2368).
u Dialling a dialling pause within
the first 5 digits:
The entire number saved is
dialled, including the
2-second dialling pause.
u Dialling a dialling pause after the
first 5 digits:
The portion of the number saved
after the pause is only dialled
after pressing the

Adjusting the telephone

Setting the handset volume

The handset volume can be set to
F
two levels.
Press the handset vol-
ume control key.
The primary volume is reset after
hanging up.
(not at 1st digit).
I
key.
4
en
Mute
You can deactivate the telephone's
microphone during a call.
C
To reactivate microphone: Press the
mute key again or press any other
key.
Setting the ringer
You can set the ringer melody and
c K
volume or turn it off.
#
Q O
...
K
2
Melody 1
4 5
Melody 2
M N
Melody 3

Operation on a PABX

Special functions/Recall key

During an external call, you can
make an enquiry or forward the call.
To do this, press the recall key
The subsequent procedure depends
on your PABX.
To set the recall key, the telephone's
flash time must be set consistent
with your PABX. Please refer to the
operating instructions for your PABX.
Press the mute key.
Lift the handset, press
the set key.
Press the hash key.
Press one of the
number keys, see
Table.
(0: Ringer off until
handset is next lifted).
Press the set key.
Volume
low medium
3
L
O
high
H
.