Technical Specifications - Central Machinery 38144 Assembly And Operating Instructions Manual

THANK YOU for choosing a Harbor Freights Tool product! For future reference, please complete the
owner's record below:
Model: _________________ Serial No: __________________________ Purchase Date: ______________
SAVE THE RECEIPT, WARRANTY CARD AND THESE INSTRUCTIONS.
manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

SKU: 38144
Model: 13 inch Drill Press-16 Speed, Floor Model
Power Source: 120V, 60HZ, Single-Phase,
Speeds: Sixteen (16) speeds ranging from 220 to 3600 RPMs
Drill Chuck Capacity: 7/64" to 5/8"
Spindle Stroke: 3-1/8"
Swing: 13-1/2"
Column Diameter: 2-57/64"
Table Type: 11-1/2" square-dry table that rotates 360 degrees and tilts 0-45 degrees in one-degree increments.
Table T-Slot Dimensions: 1/2"
Overall Height: 62-7/8"
Unpacking
Unpack and check contents. Make sure you have all parts described in the Parts Lists and Figure 1 on page 3.
Remove all preservative lubricants from parts with a clean dry cloth.
Some of the parts are heavy and may require two people for lifting.
If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353. The shipping box should contain:
Table Assembly
A.
B. Arm
C. Instruction manual and warranty card
D. One Bag of Parts
E. Base
#38144
F .
G.
J.
REV 10/03 REV 03/04
It is important that you read the entire
Head Assembly
One (1) box of loose parts
Column Assembly
Page 2