Specifications; Important Safety Precautions - Central Machinery 35570 Assembly And Operating Instructions Manual

Motor
Speed
Vertical Capacity
Throat
Table
Base
Overall Weight
You will need this manual for the safety instructions, assembly instructions, operating
procedures, parts list, and diagram. Put them in a safe, dry place for future reference.
WARNING: When using electric tools, machines or equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL.
1 KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. CONSIDER WORK AREA CONDITIONS. Don't use machines or power tools in damp, wet,
or poorIy lit locations. Don't expose to rain. Keep work area well lit. Don't use tools in the
presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. All children should be kept away from the work area. Don't let
them handle machines, tools or extension cords.
4. STORE IDLE EQUIPMENT. When not in use, tools should be locked up in a dry location to
inhibit rust. If possible, store in an area out of reach of children.
5. DON'T FORCE THE MACHINE OR TOOL. It will do the job better and more safely at the
rate for which it was intended.
6. USE THE RIGHT TOOL. Don't force a small tool or attachment to do the work of a larger
industrial tool. Don't use a tool for a purpose for which it was not intended.
7. DRESS PROPERLY. Don't wear loose clothing or jewelry. They can be caught in moving
parts. Protective, electrically non-conductive gloves and non-skid footwear are recommended
when working, Wear protective hair covering to contain long hair, preventing it from getting
caught in machinery.
8. USE EYE AND EAR PROTECTION. Use a full face mask as the mortising machine will
produce wood chips. Wear a clean dust mask due to fine or coarse dust. When operating for
extended periods of time, use approved ear protection. Face masks, dust masks, anti ear
protectors are available from Harbor Freight Tools.
9. DON'T ABUSE THE POWER CORD. Do not yank it to disconnect it from receptacle. Do not
move bench-mounted or floor-standing machines with the power cord in the outlet. Keep cord
away from heat, oil, and sharp edges.
10. SECURE WORK. Use the included clamps or a vice to hold the work. It's safer than using
your hands and it frees both hands to operate the tool.
SKU 35570

SPECIFICATIONS

SAVE THIS MANUAL

IMPORTANT SAFETY PRECAUTIONS

1/2 HP, 2.3 Amps @ 110 V, 60Hz
3580 RPM
5"
5"
13-3/8" x 6"
10" x 7-3/4"
54 lbs.
Page 2