Table of Contents
Advertisement
Quick Links
7-1/4" CIRCULAR SAW
WITH LASER
Model 95004
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright 2006 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 95004
Summary of Contents for Chicago Electric 95004
- Page 1 Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353.
-
Page 2: Product Specifications
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from SKU 95004 For technical questions, please call 1-800-444-3353 Description... -
Page 3: Electrical Safety
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 95004 For technical questions, please call 1-800-444-3353 ELECTRICAL SAFETY... - Page 4 If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. SKU 95004 For technical questions, please call 1-800-444-3353 TOOL USE AND CARE PAGE 4...
-
Page 5: Specific Safety Rules
Maintain labels and nameplates on the Circular Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear safety impact eye goggles and heavy work gloves when using the Circular Saw. - Page 6 Bright, shiny, reflective workpieces are not suitable for Laser use as the surface could reflect the beam back at the operator. Always unplug the Circular Saw from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. SKU 95004 For technical questions, please call 1-800-444-3353 PAGE 6...
- Page 7 Guard. Do not use the Circular Saw if the Guard assembly does not oper- ate properly. Before each use, make sure the Blade Guard does not touch the Saw Blade. SKU 95004 For technical questions, please call 1-800-444-3353 KICKBACK PRECAUTIONS...
-
Page 8: Grounded Tools: Tools With Three Prong Plugs
Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low SKU 95004 For technical questions, please call 1-800-444-3353 SAVE THESE INSTRUCTIONS... -
Page 9: Double Insulated Tools: Tools With Two Prong Plugs
Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) THIS PRODUCT USES A 2-PRONG PLUG FIGURE B SKU 95004 For technical questions, please call 1-800-444-3353 USE A 120 VOLT, GROUNDED, ELECTRICAL OUTLET... -
Page 10: Extension Cords
12.1 – 16.0 16.1 – 20.0 * Based on limiting the line voltage drop FIGURE C to five volts at 150% of the rated amperes. SKU 95004 For technical questions, please call 1-800-444-3353 EXTENSION CORDS (120 VOLT) EXTENSION CORD LENGTH... -
Page 11: Product Features
When unpacking, check to make sure all the parts shown on the Parts List on page 18 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. -
Page 12: Assembly Instructions
Saw Blade point upward and that the direction of the arrow shown on the Saw Blade matches the direction of the arrow shown on the Blade Housing (11). (See Figure F.) SPINDLE LOCK (39) SAFETY COVER (26) SKU 95004 For technical questions, please call 1-800-444-3353 ASSEMBLY INSTRUCTIONS OUTER PLATE (18) SCREW (48) - Page 13 Depth Bracket (46) provided. Then, lower the Depth Lock to its locked position. NOTE: Always add 1/8” to your depth of cut so the Saw Blade (20) can cut through the material. (See Figure G.) BASE SKU 95004 For technical questions, please call 1-800-444-3353 DEPTH BRACKET (46)
- Page 14 Scale. Then, retighten the Screw to lock the Guide Ruler in position. NOTE: The Guide Ruler can be used from both sides of the Base. (See Figure I.) BASE GUIDE RULER SKU 95004 For technical questions, please call 1-800-444-3353 SCALE (10) SCREW...
- Page 15 Then, remove the Circular Saw from the workpiece. Make sure to store the Circular Saw in a clean, dry, safe location out of reach of children and other unauthorized people. SKU 95004 For technical questions, please call 1-800-444-3353 PAGE 15...
-
Page 16: Troubleshooting
To replace the Batteries for the Laser: The Laser Guide requires the use of two “AAA” Batteries. To replace the Batteries, open the Laser Plate Cover (17) to expose the Batteries. Remove the old Batteries. Then, install two fully SKU 95004 For technical questions, please call 1-800-444-3353 TROUBLESHOOTING 1. - Page 17 (See Assy. Diagram.) F. NOTE: New Carbon Brushes (60) tend to arc or spark when first used until they wear and conform to the motor’s Stator (56). (See Assy. Diagram.) SKU 95004 For technical questions, please call 1-800-444-3353 “AAA” BATTERIES (QTY.
-
Page 18: Please Read The Following Carefully
Bearing Holder Orientation Steel Cover Screw (M5 x 14) Gear Spring Washer (#5) Wave Spring Washer (#12) C-Ring (#12) Oilless Bearing Gear Box SKU 95004 For technical questions, please call 1-800-444-3353 PARTS LIST Description Qty. Part # Description Qty. Spring... -
Page 19: Assembly Diagram
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 95004 For technical questions, please call 1-800-444-3353 PAGE 19... -
Page 20: Warranty
WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser for a period of ninety days from date of purchase that the motor, the belts (if so equipped), and the blades (if so equipped) are free of defects in materials and workmanship.
Need help?
Do you have a question about the 95004 and is the answer not in the manual?
Questions and answers