Load Setup Defaults
Load Setup Defaults option loads the default system values to the system
configuration fields. If the CMOS is corrupted, the defaults are loaded automatically.
Choose this option, and the following message will appear:
Load Setup Defaults (Y/N)? N
To use the Setup defaults, change the prompt to "Y" and press <Enter>.
MS6261 User's Manual
I ntegrated Peripherals Setup
1. Choose "INTEGRATED PERIPHERALS SETUP"from the Main Menu, and a
screen depicted in Figure 3-7 will appear.
Figure 3-7. Integrated Peripherals Setup Screen
A short description of screen options (Figure 3-7) follows:
OnChip First/Second
This chipset contains a PCI IDE interface which
Channel
supports for 2 IDE channels. Select Enabled to
activate the first and/or second IDE interface. Select
Disabled to deactivate this interface, if you install a
first and/or second add-in IDE interface IDE interface.
IDE HDD Block Mode
This item allows hard disk controller to use the fast
block mode to transfer data to and from your hard disk
drive (HDD).
Select Enabled only if your hard drives support block
mode.
MS6261 User's Manual